Category: News

35

4 channel Digital LED controller – ET-DL01

Introduction Our previous design, the ET-AL01 Analog LED controller, was designed to control the regular “Analog” (RGB) LED strips. These strips are easy in use, but due to the way they work, the whole strip will emit the same color. There are RGB LED strips...

ESP32 H2 picture 0

ESP32-H2 announced! Comes with Bluetooth LE and Zigbee support!

Today Espressif systems, the company behind the ESP8266 and ESP32 controllers, announced a new generation of their ESP32 lineup. In this new generation, Espressif will use again the RISC-V architecture CPU like in the ESP32-C3  and the ESP32-C6. Their legacy controllers (ESP8266 and ESP32) were...

DNSK-P11 front 210

ESPHome Panasonic Climate WiFi interface

This version is outdated: Please check: www.ingeniousmakers.com/p11 for a updated version! Getting the Panasonic Climate control off the cloud A little while back I came across a custom esphome component for a esp32 or esp8266 based airconditioning/Climate Wifi interface. A great way to get your...

0

Not all ESP32 modules are the same.!?

Background During the extensive testing of our designs we ran into issues with some modules not wanting to boot up after a power cycle. This was happening about 8 out of 10 times. The first suspected part was the voltage regulator used in combination with...

1

The birth of a design

The ET-AL01  Analog LED Controller The process of designing a circuit starts with an idea. Sometimes the idea is based on a question of someone else, and sometimes it is just seeing the need or fun of something 🙂 . For a design there are...

72

5 channel Analog LED controller – ET-AL01

Introduction Michel asked me to design an analog LED controller with 5 channels, since he wanted to be able to control a nice LED strip with an RGB LED and a warm white and cool white LED (Like Philips Hue). When searching the internet he could...

6

Esphome on a Tuya IR Remote Control blaster

!!! Please mind we are getting reports that this products no longer houses a esp8266 chip !!! This time we put esphome on a Tuya Smart IR Remote Control WiFi IR Blaster which we bought from seller ”. It’s just a cheap IR blaster that...

Power metering for the Sonoff Dual R3 r1.6 using esphome 4

The new Sonoff DualR3 is here!

We got a nice little surprise in the mail today. The all new , a Dual Relay Wi-Fi Smart Switch with Power Metering. With this ESP ‘thing’  you can operate (2) lights, appliances and motorized facilities like blinds and shutters. According to Sonoff it’s the...

Translate »